Home News & Blog Uncategorized Design for Manufacturability in Thermoforming: What Engineers Need to Know

Design for Manufacturability in Thermoforming: What Engineers Need to Know

At Tru-Form Plastics, we believe successful thermoforming projects start well before a part reaches production. Bringing manufacturing expertise into the design process early can help customers avoid problems, find better ways to achieve their goals, and make informed decisions about materials, geometry, tooling, and assembly. Whether we’re developing a creative solution with an engineering team or hosting an in-person design forum to demonstrate what’s possible, our goal is to help customers turn their concepts into manufacturable, functional parts.

An advertising agency came to Tru-Form Plastics with an unusual request. They wanted to reproduce a small, snap-together tin, approximately two inches in diameter, as an 18-inch promotional display and shipping case.

The larger version needed to look and function like the original, but there was a problem with scaling up the closure. Reproducing the snap feature at that size would create such a tight fit that no one would be able to open the container.

Our team recommended a different closure configuration, preserving the appearance and operation of the original without making it difficult to use. Once the exterior artwork was applied, the finished display closely resembled the smaller tin and opened and closed without difficulty.

Projects like this demonstrate the value of involving a thermoforming manufacturer during product development. A feature that works at one size or with one manufacturing method doesn’t necessarily translate to another application.

Through design for manufacturability (DFM) discussions, we help customers identify potential problems with part geometry, material selection, and manufacturing requirements before changes become more difficult and expensive to make.

Thermoforming Requires a Different Approach to Part Geometry

Many engineers we work with have more experience with injection molding than thermoforming. Both processes manufacture plastic components, but differences in how the material is formed affect the features best suited to each method.

Injection molding involves injecting molten plastic into a mold cavity. Thermoforming starts with a heated plastic sheet formed against a tool using vacuum, pressure, or a combination of forming methods. The sheet stretches during forming, creating variations in finished wall thickness.

Draw ratio is particularly important when evaluating deeper parts. As material stretches to reach the tool surface, certain areas become thinner than others. Engineers need to account for material distribution when establishing wall thickness requirements, especially for larger components where structural integrity is a concern.

Draft angles also affect manufacturability. A part with minimal or no draft presents challenges during removal from the forming tool. Large undercuts introduce additional difficulties, particularly when the geometry was originally developed with injection molding in mind.

Sharp radii and webbing are other common concerns. Tight corners affect material distribution, and certain geometries cause excess material to fold during forming.

Dimensional tolerances require attention as well. Understanding which dimensions are most important to the part’s function helps guide discussions about forming, trimming, and the accuracy achievable through the manufacturing process.

Thermoforming design guidelines give engineers a starting point for evaluating draft and material distribution. During DFM reviews, we examine the proposed part geometry with the customer’s engineering team and recommend adjustments based on how the part will be formed and trimmed.

Account for What Happens After Forming

Manufacturing considerations extend into the operations performed after a part comes off the forming tool.

Parts requiring threaded inserts, snap features, or bonded attachments need sufficient material and appropriate geometry around their attachment points. The forces involved during assembly and use affect how these features perform, particularly on larger thermoformed components.

We discuss secondary operations early because assembly requirements frequently affect decisions about the formed part itself. Understanding how a component connects to surrounding equipment helps us identify areas where the proposed geometry warrants a closer look.

Surface appearance can also affect tooling decisions. Depending on the material and finish requirements, incorporating texture into the forming tool may be an option worth evaluating before specifying a painted finish.

Tool texture and painting involve different manufacturing requirements. Discussing the options before tooling decisions are finalized gives customers a clearer understanding of the available manufacturing approaches.

A drawing communicates dimensions and geometry, but information about assembly requirements and the operating environment provides additional context. We want to understand how the finished component will function so we can evaluate its manufacturability accordingly.

When a Medical Tray Needed a Different Approach

A medical customer came to us with a tray intended to interact with its product in a particular way. The conventional manufacturing approach had produced parts completely unusable for the intended application.

After reviewing the customer’s performance requirements, we suggested an alternative tray configuration and material. Our team prototyped the proposed solution, which satisfied the customer’s requirements.

Understanding the tray’s intended function guided our recommendations. Rather than continuing with an unsuccessful manufacturing approach, we worked with the customer to evaluate a different configuration and material.

A preliminary drawing gives us a starting point, but understanding how the part interacts with another product often reveals manufacturing considerations worth discussing before tooling begins.

Bringing Aerospace Engineers onto the Manufacturing Floor

Recently, one of our aerospace customers was interested in heavy gauge thermoforming for aerospace design. They were preparing for several upcoming projects involving a relatively new group of designers. Several engineers had limited practical experience with thermoforming, so we invited 14 members of their team to our facility for a Heavy Gauge Thermoforming Master Class.

We began with an overview of the process, including how thermoforming differs from injection molding. From there, we discussed draw ratios, estimating finished-part thickness, and evaluating draft angles. Webbing and sharp radii were also covered, along with the manufacturing challenges associated with these features.

The engineers were particularly interested in material selection for aerospace cabin components. Another area of discussion involved hard and soft tooling, including how each fits into the product development timeline.

As the conversation moved into manufacturing and quality control, the group had questions about dimensional accuracy and tolerances. We discussed how drawing requirements relate to the capabilities of the forming process and the manufacturing operations involved.

The class ended with a tour of our manufacturing floor and tool shop. Many of the engineers had never been exposed to the equipment and manufacturing processes used to produce the parts they work on. Seeing the operation firsthand gave them a better understanding of how their decisions affect tooling, forming, and final assembly.

We enjoy sharing our technical knowledge directly with customer engineering teams. Our approach is to be open about the capabilities and limitations of thermoforming, answer questions, and explain the reasoning behind our manufacturing recommendations. Engineers have more information to work with when they’re familiar with what happens on the shop floor.

Involve Your Thermoforming Partner Before Tooling Decisions Are Final

Discovering a manufacturability issue after production tooling has been made can lead to tooling modifications, additional development work, and unexpected costs.

At Tru-Form Plastics, we encourage engineers to bring us into the conversation while there’s still flexibility to evaluate part features and manufacturing options. Even a preliminary CAD model gives us a starting point for discussing potential concerns.

Have a thermoformed part in development? Contact Tru-Form Plastics to discuss your project with our team.

Recent Articles

  • Design for Manufacturability in Thermoforming: What Engineers Need to Know

    At Tru-Form Plastics, we believe successful thermoforming projects start well before a part reaches production. Bringing manufacturing expertise into the design process early can help customers avoid problems, find better ways to achieve their goals, and make informed decisions about materials, geometry, tooling, and assembly. Whether we’re developing a creative solution with an engineering team…

    Read More

  • Solving a Complex Assembly Challenge with an Aircraft Lavatory – Toilet Shroud

    The aircraft lavatory toilet shroud presented a problem that many thermoformers would not want to touch. The existing manufacturing method relied on drape forming, a labor-intensive process that required multiple people to handle and shape heated plastic by hand. It was slow, difficult to control, and not well-suited for repeatable production. For the customer, that…

    Read More

  • Nearshoring vs. Onshoring: Choosing the Right Manufacturing Strategy for Aerospace and Defense

    A prototype needing another revision on Thursday creates a different sourcing problem than a production part that has run unchanged for three years. Aerospace and defense OEMs source both types of work, which is why the nearshoring vs. onshoring question rarely has one answer. Mexico offers real geographic and cost advantages; domestic production brings something…

    Read More